Only two brands build tires 100% in the USA. Hank explains the truth about American-made tires and how to verify origin with the DOT code.
View Full Post...
Wondering what the #1 rated tire is? There's no single winner. Here's the top-rated tire in every category, with Dennis Feldman's real fitment picks.
View Full Post...
Hank Feldman on slot mag wheels: what the five-slot design is, why we call them mags, and how to run a set on your classic build today.
View Full Post...
Dennis Feldman breaks down concave wheel geometry, the shallow-to-deep spectrum, and how concavity affects brake caliper clearance and fitment.
View Full Post...
Hank breaks down smoothie wheels — the clean, spokeless classic look, steel versus billet, baby moons and caps, and how to get the right stance on your build.
View Full Post...
Dennis breaks down the acoustic foam inside quiet tires — how it fights cavity noise, the brand systems behind it, and what it means at repair time.
View Full Post...
Hank walks through wheels and tires for C10 and squarebody Chevy trucks — bolt patterns by year, factory sizes, and the right stance for your build.
View Full Post...
Deep dish wheels look aggressive, but the lip that sells the look carries real tradeoffs. A spec-by-spec breakdown before you order.
View Full Post...
Shoppers throw the term "hybrid tire" around three different ways. Hank sorts out what it really means — and which one you're probably after.
View Full Post...
Deep dish rims aren't just for show. Here's what the lip actually does, from wider-tire fitment to brake clearance, and where it's pure cosmetics.
View Full Post...
That brown haze on your sidewalls isn't dirt or rust. Hank explains tire blooming, why it means your rubber is protecting itself, and how to fix it.
View Full Post...
What revolutions per mile really tells you about a tire, why it never matches the simple math, and how it changes your gearing when you resize.
View Full Post...
Those wispy little hairs on new tires have a name — vent spews. Hank explains where they come from, what they don't mean, and whether to pull them off.
View Full Post...
Conical, ball, or mag — the seat shape decides which lug nut your wheel needs. Here's how to identify yours and what a mismatch does to clamp load.
View Full Post...
That forward-leaning, nose-down look isn't an accident. Hank explains where rake came from, how your wheels and tires set it, and how much is too much.
View Full Post...
A mileage warranty isn't a guarantee. Dennis breaks down the proration math, the 2/32-inch trap, and the fine print that quietly voids coverage.
View Full Post...
Affordable tires usually last 2-4 years or 20,000-40,000 miles. Here's what cuts that short and how to get every mile out of budget rubber.
View Full Post...
Cheap tires save money up front but trade away wet grip, tread life, and ride. Here's the data-backed breakdown of when they make sense.
View Full Post...
Bolt pattern, offset, diameter, finish — here's how to pick pickup truck rims that actually fit your truck and the way you drive it.
View Full Post...
Most cars tolerate 5-15mm of offset change before rubbing starts. Find your safe range, why wheel width matters, and when you've gone too far.
View Full Post...
Most off-road trucks land on the same wheel: a 17x9 with negative offset. Hank explains why it works, which trucks run it, and how to pair 33s or 35s.
View Full Post...
Three finishes get sold as chrome and they're nothing alike. Dennis breaks down PVD, traditional plating, and chrome powder on weight, winter use, and care.
View Full Post...
A 20x8.5 front and 20x10 rear gives RWD muscle that planted, steamroller stance. Hank covers which cars it fits, the right tire sizes, and the trade-offs.
View Full Post...
Gloss, matte, and satin black wheels look alike in a thumbnail but wear, clean, and age very differently. Dennis breaks down which finish fits your ride.
View Full Post...
Your pre-mounted wheel and tire package landed on the porch. Hank walks through inspecting it, bolting it on at home, and knowing when to leave it to a shop.
View Full Post...
